AViD My Current Project

Prototype AViD
Prototype AViD

I have mentioned on Facebook and on Atari Age that I am working on a way to plug a stock Adam into a PC and have the PC then act like an Adam Disk Drive (or other SmartNet device) with no additional hardware or software being necessary on the Adam. I have given this project a name, AViD (Adam Virtual Device) I am happy to say have reached a milestone in the project.

Some background on the Adam and how it communicates

AViD plugged into the USB -RS232 adapter and extra USB 5V power for keyboard
AViD plugged into the USB -RS232 adapter and extra USB 5V power for keyboard

The disk drives and the keyboard plug into the CPU and use a quasi – serial network called SmartNet. All devices communicate on a single shared transmit and receive wire at 62,500 baud 8 bits, 1 stop bit no parity. I know these details because of a single piece of paper I got in a large Adam collection I purchased The paper was from the electronics reseller Jameco which was included when you purchased a surplus Adam keyboard from them and it gives the specs and a very simple circuit diagram to interfacing with the keyboard. This shared wire and the unusual baud rate makes it very hard to connect it to a PC (or other system) where this baud rate is not supported and this may be why nothing like this has been tried before. Researching the internet I found a USB to RS232 adapter which supports this unusual baud rate. Using this adapter, the simple circuit diagram and some software I have written I have successfully connected an Adam keyboard to a Windows 7 PC and am able to communicate with it.

Houston we have lift-off

"Hello World" from the AViD plugged into the PC
“Hello World” from the AViD plugged into the PC

Now that I can read the keyboard the next step will be to switch the system and have a real Adam ask the PC for keystrokes. These can come from the keyboard or from a text file.

Down the road

Once I am totally confident in the PC “typing” to the Adam on the SmartNet the next step will be to have the PC act as a disk drive, responding to the Adam and sending and receiving data.

The sky’s the limit

Since all communication to the keyboard, disk drives, printer and  possibly digital drives goes through the SmartNet the PC can play many roles. One may be to intercept printer commands and then print to files on the PC.

How can you help?

If any of you happen to have any details on how the Adam communicates to the drives (or vice versa) or source code (EOS or OS7) that show how this is done I would be very happy if you could leave a reply here with that information or where  I can find it. I can always be reached on FaceBook too in the Coleco Adam page.

 

4 Replies to “AViD My Current Project”

  1. Great Stuff! I love seeing love put into the ADAM! Your idea of using the PC is great. Have you thought of a Raspberry PI? You could have a dedicated pi emulating all the stuff instead of a full PC.

    Craig

    1. It is USB based and the software will be able to run on Windows, Mac or Linux so I dont see why it could not be run on a PI also.

    1. It will be my own software – I am working on emulating a device on the Adam Net – which in this case is a disk drive – but it can also allow you to use your PC keyboard or automatically type a text file from the PC.

Leave a Reply

Your email address will not be published. Required fields are marked *